If you ship goods out of BC on wood pallets, sooner or later a customer, freight forwarder or customs broker will ask: “Are your pallets heat-treated?” For many export shipments, the answer has to be yes — and the pallet has to carry the right stamp to prove it.
This guide explains what ISPM-15 is, when you need heat-treated (HT) pallets, how to read the stamp, and how shipments to the US differ from overseas shipments.
The short answer
- Shipping overseas (Asia, Europe, Australia, Latin America and most other countries): use ISPM-15 heat-treated pallets with a clear, legible stamp. Most countries require it for solid wood packaging.
- Shipping to the US: wood packaging made from Canadian or US wood has generally been exempt from ISPM-15 between the two countries. Many customers, carriers and brokers still ask for HT pallets, so confirm before you ship.
- Shipping within Canada: you usually don’t need HT pallets, unless your customer asks for them or the goods may later be re-exported.
- Not sure? Ask your customer or broker what the destination requires, then order HT pallets for anything that might leave North America.
What is ISPM-15?
ISPM-15 is an international standard for wood packaging material used in global trade. It was set under the International Plant Protection Convention (IPPC) to stop insects and plant diseases from travelling across borders inside pallets, crates, skids and dunnage.
The standard covers solid wood packaging. Wood must be debarked and treated with an approved method, then marked with the IPPC stamp. In Canada, heat treatment is the usual method. The wood is heated until its core reaches at least 56°C for at least 30 continuous minutes.
In Canada, the Canadian Food Inspection Agency (CFIA) runs the program that registers heat-treatment facilities and authorizes the stamp.
What the HT stamp means
A compliant pallet carries the IPPC mark, usually burned or stamped on two opposite sides. Here is how to read it:
| Part of the stamp | What it shows |
|---|---|
| IPPC symbol (wheat-ear logo) | The wood packaging meets ISPM-15 |
| Country code (CA for Canada) | Where the treatment was done |
| Registration number | The registered facility that treated or marked the wood |
| Treatment code (HT) | Heat treatment was used |
A few things to check before you load:
- Legibility: the stamp should be clear and permanent. Handwritten marks, faded marks or partial stamps can cause problems at the border.
- Placement: the mark should be visible on at least two opposite sides of the pallet.
- Repairs: if an HT pallet is repaired, any new boards must also be treated. A pallet that has been heavily repaired or rebuilt may need to be re-treated and re-marked.
- “Kiln-dried” is not the same thing: a KD stamp alone does not show ISPM-15 compliance. Look for the IPPC symbol and “HT”.
US vs overseas shipments
| Shipping to the US | Shipping overseas | |
|---|---|---|
| ISPM-15 required? | Generally exempt for wood packaging of Canadian or US origin | Yes, in most countries |
| HT stamp needed? | Often requested by customers, carriers or brokers | Yes, on every wood pallet, crate and skid |
| Risk if missing | Delays or questions if the paperwork or customer expects HT | Shipment may be held, treated, sent back or destroyed at the shipper’s cost |
| Our advice | Confirm with your customer or broker; order HT if in doubt | Always order HT pallets |
Rules can change and some countries have their own extra requirements. Your customs broker or freight forwarder is the best source for the current rules at your destination.
Which shipments need heat-treated pallets?
You should plan on HT pallets or crates when:
- You ship by ocean container from the Port of Vancouver or by air to overseas customers
- Your goods go to Mexico, where ISPM-15 applies
- Your customer’s purchase order or receiving rules say “HT” or “ISPM-15”
- Your goods may be re-exported after reaching a US or Canadian warehouse
- You use wood crates or skids for machinery, parts or other heavy export freight
You usually don’t need HT pallets for:
- Local and domestic loads that stay in Canada
- Packaging made only from processed wood such as plywood, OSB or particleboard, which ISPM-15 does not cover
Common mistakes to avoid
- Mixing HT and non-HT pallets on one export load. One unstamped pallet can hold up the whole shipment.
- Using unstamped dunnage or bracing. Wood blocking inside a container must meet ISPM-15 too.
- Ordering at the last minute. HT pallets and crates are usually built or sourced to order, so allow lead time before your sailing or pickup date.
- Assuming the stamp covers mould. Heat treatment kills pests, but it doesn’t stop mould from growing later. Keep pallets dry and under cover before loading.
Heat-treated pallets from Express Pallet Collection
Express Pallet Collection has supplied BC businesses from our Surrey yard since 2016, and our management team has more than 20 years of pallet experience. Our heat-treated pallets are sourced from a CFIA-registered heat-treatment facility, so they arrive with the proper ISPM-15 stamp. We also offer heat-treated crates for export freight.
- New pallets: built to your size, with a minimum order of 30–50 pallets depending on demand and a lead time of 3–5 business days. See new pallet manufacturing.
- Crates and skids: minimum order of 50, with heat-treated crates available.
- Standard sizes: not sure which size your export customer needs? See our guide to standard pallet sizes in Canada.
- More on HT pallets: visit our heat-treated pallets page.
We deliver across Surrey, Langley, Delta, Metro Vancouver and the Fraser Valley. See pallets in Surrey and pallets in Delta for local delivery details.
Frequently asked questions
Do I need heat-treated pallets to ship from BC to the US?
Usually not by law, because wood packaging of Canadian or US origin has generally been exempt between the two countries. However, many US customers, carriers and brokers ask for HT pallets anyway. Check with them before you ship.
What does “HT” on a pallet mean?
HT means heat-treated. The wood was heated until its core reached at least 56°C for at least 30 minutes. With the IPPC symbol, country code and registration number, it shows the pallet meets ISPM-15.
Are heat-treated pallets stronger than regular pallets?
No. Heat treatment is about pest control, not strength. Strength depends on the wood, design and build quality.
Can recycled pallets be used for export?
Yes, if they carry a valid ISPM-15 stamp and any repairs meet the standard. For overseas shipments, many exporters choose new HT pallets so every pallet on the load is clearly compliant.
How long does it take to get heat-treated pallets?
It depends on size and quantity. New pallets typically take 3–5 business days. Call us with your sailing or pickup date and we’ll confirm timing.
Get a quote
Shipping overseas or to a customer who wants ISPM-15 pallets? Tell us the size, quantity and delivery date, and we’ll quote heat-treated pallets or crates for your next export load.
Request a quote or call +1 778-776-1957. Our Surrey yard at 10950 125 St, Unit 2 is open Monday to Friday, 8am–4pm.


